Automatic Welding Manipulator

1. According to its loading capacity, effective stretching and elevating range, the automatic welding manipulator can be divided into light type, medium type, heavy type and ultra-heavy type.
2. Three structural configurations are available, namely the stationary type, stationary and rotary type, movable and rotary type.
3. The section areas of the boom and the column are determined using scientific calculation. The horizontal boom drooping is 2mm/m.
4. The boom of our automatic welding manipulator is equipped with a ratchet structured anti-falling device to ensure safety and reliability.
5. A cross fine tuner is located on the terminal of the boom to allow manipulation via remote control.
6. Our welding manipulator adopts eccentric shaft which can decrease clearance between the roller and rail
7. Column revolve unit can support motor driven as well as manual driven.
8. The control unit is composed of control board and remote control box. A control interface for positioner and turning rolls are also available.
Main Technical Parameters

Model	Small/Light duty type
	LH1010	LH2020	LH3030	LH4040	LH5050	LH6060	LH7070	LH8080
Lifting stroke (mm)	1000	2000	3000	4000	5000	6000	7000	8000
Retracting stork (mm)	1000	2000	3000	4000	5000	6000	7000	8000
Lifting speed (mm/min)	435(Small duty type)1000(Light duty type)		1000	1000	1000	1000	1000	1000
Retracting speed (mm/min)	120-1200
Minimum distance between boom and track surface(mm)	740(moving with rotation) 690(fixed with rotation)
Boom end maximum weight loading (kg)	80
Column traveling	Manual control or automatic control		automatic control
Trolley traveling	Manual control or automatic control		automatic control